REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.

PROCEDURE


  1. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER


    1. A0027EE

      Disengage the 2 guides and 2 claws to remove the front outer seat track bracket cover as shown in the illustration.

  2. REMOVE FRONT INNER SEAT TRACK BRACKET COVER

    Tech Tips

    Use the same procedure as for the front outer seat track bracket cover.

  3. REMOVE REAR INNER SEAT TRACK BRACKET COVER


    1. A00284V

      Disengage the 2 clips and remove the rear inner seat track bracket cover.

  4. REMOVE REAR OUTER SEAT TRACK BRACKET COVER


    1. A0026YG

      Disengage the 3 clips and remove the rear outer seat track bracket cover.

  5. REMOVE REAR DOOR SCUFF PLATE

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  6. REMOVE REAR SEAT HEADREST ASSEMBLY

  7. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

  8. REMOVE REAR NO. 1 SEAT ASSEMBLY


    1. w/ Seat Heater System or w/ Seat Belt Warning System:


      1. Disconnect the connector.

    2. A002B1F

      Remove the 3 bolts on the rear side of the rear No. 1 seat assembly.

    3. A002CP8

      Remove the 2 bolts on the front side of the rear No. 1 seat assembly.

    4. Remove the rear No. 1 seat assembly.

      Note

      Be careful not to damage the vehicle body.