REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side) COMPONENTS
ILLUSTRATION
| *1 | FRONT INNER SEAT TRACK BRACKET COVER | *2 | FRONT OUTER SEAT TRACK BRACKET COVER |
| *3 | REAR DOOR SCUFF PLATE | *4 | REAR INNER SEAT TRACK BRACKET COVER |
| *5 | REAR NO. 1 SEAT ASSEMBLY | *6 | REAR OUTER SEAT TRACK BRACKET COVER |
| *7 | REAR SEAT CENTER HEADREST ASSEMBLY | *8 | REAR SEAT HEADREST ASSEMBLY |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | CENTER ARMREST HINGE COVER RH | *2 | NO. 1 REAR SEAT CENTER ARMREST PLATE |
| *3 | REAR NO. 1 SEAT CENTER ARMREST COVER | *4 | REAR SEAT CENTER ARMREST ASSEMBLY |
| *5 | REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY | *6 | REAR NO. 1 SEAT CENTER ARMREST PAD |
| *7 | NO. 2 REAR SEAT CENTER ARMREST PLATE | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/o Seat Belt Warning System | *B | w/ Seat Belt Warning System |
| *1 | REAR SEAT INNER BELT ASSEMBLY | *2 | REAR SEAT REAR CUSHION MOULDING RH |
| *3 | WIRE HARNESS CLAMP | *4 | HOG RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/ Seat Heater System | *B | w/o Seat Belt Warning System |
| *C | w/ Seat Belt Warning System | - | - |
| *1 | NO. 1 RECLINING ADJUSTER RELEASE HANDLE | *2 | REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY |
| *3 | REAR NO. 1 SEATBACK LOCK STRIKER COVER | *4 | REAR SEAT COVER CAP |
| *5 | REAR SEAT CUSHION COVER WITH PAD | *6 | REAR SEAT HINGE COVER |
| *7 | REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY | *8 | REAR SEAT WIRE |
| *9 | SEAT HEATER ASSEMBLY | *10 | SEAT HEATER CONTROL SUB-ASSEMBLY |
| *11 | SEPARATE TYPE REAR SEAT CUSHION COVER | *12 | SEPARATE TYPE REAR SEAT CUSHION PAD |
| *13 | HOG RING | *14 | TAG PIN |
| *15 | WIRE HARNESS CLAMP | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/o Seat Belt Warning System | *B | w/ Seat Belt Warning System |
| *1 | BELT PROTECTOR | *2 | NO. 2 RECLINING REMOTE CONTROL LEVER KNOB |
| *3 | REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY | *4 | REAR NO. 1 SEAT COVER BEZEL |
| *5 | REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY | *6 | REAR SEAT INNER BELT ASSEMBLY RH |
| *7 | REAR SEAT SHOULDER BELT COVER | *8 | REAR SEAT SHOULDER BELT COVER RH |
| *9 | REAR SEATBACK BOARD CARPET ASSEMBLY | *10 | REAR SEATBACK COVER |
| *11 | REAR SEATBACK COVER RH | *12 | REAR SEATBACK COVER WITH PAD |
| *13 | REAR SEATBACK LOCK STRIKER COVER | *14 | SEAT BELT ANCHOR COVER CAP |
| *15 | HOG RING | *16 | WIRE HARNESS CLAMP |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/ Seat Heater System | - | - |
| *1 | SEAT HEATER ASSEMBLY | *2 | SEPARATE TYPE REAR SEATBACK COVER |
| *3 | SEPARATE TYPE REAR SEATBACK PAD | *4 | HOG RING |
| *5 | TAG PIN | *6 | WIRE HARNESS CLAMP |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | NO. 1 REAR SEAT TRACK CONTROL CABLE ASSEMBLY | *2 | NO. 2 REAR SEAT RECLINING CONTROL CABLE |
| *3 | REAR NO. 1 SEAT INNER SHIELD COVER | *4 | REAR NO. 1 SEAT RECLINING COVER RH |
| *5 | REAR SEAT CUSHION HINGE COVER | *6 | REAR SEAT HINGE COVER |
| *7 | REAR SEAT HINGE COVER LH | *8 | REAR SEAT REAR CUSHION MOULDING |
| *9 | REAR SEAT RECLINING CONTROL CABLE | *10 | REAR SEATBACK FRAME SUB-ASSEMBLY |
| *11 | RECLINING HINGE COVER | *12 | NO. 1 SEAT CUSHION FRAME SUB-ASSEMBLY RH |
| *13 | WIRE HARNESS CLAMP | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | REAR SEAT CUSHION FRAME SUB-ASSEMBLY RH | *2 | REAR SEAT INNER TRACK ASSEMBLY RH |
| *3 | REAR SEAT OUTER TRACK ASSEMBLY RH | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |