SEAT VARIABLE CUSHION SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT VARIABLE CUSHION SWITCH


    1. A018J3KC01
      *A for LHD
      *B for RHD
      *a Front Switch
      *b Rear Switch
      *c

      Component without harness connected

      (Seat Variable Cushion Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LHD
      Tester Connection Condition Specified Condition
      2 - 5 Front switch pressed Below 1 Ω
      3 - 4
      1 - 5 Off Below 1 Ω
      3 - 4
      1 - 5 Rear switch pressed Below 1 Ω
      2 - 3
      for RHD
      Tester Connection Condition Specified Condition
      3 - 2 Front switch pressed Below 1 Ω
      5 - 1
      3 - 4 Off Below 1 Ω
      5 - 1
      3 - 4 Rear switch pressed Below 1 Ω
      5 - 2

      If the result is not as specified, replace the seat variable cushion switch.