CLOCK INSTALLATION

PROCEDURE

1. INSTALL CLOCK ASSEMBLY

   
   

   1. Connect the connector.

   2. Engage the 2 claws.

   3. Install the clock assembly with the 2 screws.

2. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

   Click here

3. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

   Click here

4. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

6. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL

   Click here

7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here