CLOCK REMOVAL

PROCEDURE


  1. PRECAUTION

    Click here

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY

    Click here

  4. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

    Click here

  8. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

    Click here

  9. REMOVE CLOCK ASSEMBLY


    1. A0027YP

      Remove the 2 screws.

    2. A0029FR

      Disengage the 2 claws.

    3. A002AQY

      Disconnect the connector and remove the clock assembly.