CLOCK INSPECTION

PROCEDURE


  1. INSPECT CLOCK ASSEMBLY


    1. A018JPGC01
      *a Security Indicator Light
      *b Rear seat belt warning light (LH) (w/ Rear Seat Belt Warning)
      *c Rear seat belt warning light (center) (w/ Rear Seat Belt Warning)
      *d Rear seat belt warning light (RH) (w/ Rear Seat Belt Warning)
      *e

      Component without harness connected

      (Clock Assembly)

      Apply battery voltage to the clock assembly and check that the indicator light illuminates.

      OK
      Battery Connection Specified Condition

      Battery positive (+) → Terminal 9

      Battery negative (-) → Terminal 8

      		 Security indicator light comes on

      Battery positive (+) → Terminal 11*

      Battery negative (-) → Terminal 8*

      		 Rear seat belt warning light (RH) comes on

      Battery positive (+) → Terminal 12*

      Battery negative (-) → Terminal 8*

      		 Rear seat belt warning light (center) comes on

      Battery positive (+) → Terminal 13*

      Battery negative (-) → Terminal 8*

      		 Rear seat belt warning light (LH) comes on

      • *: w/ Rear Seat Belt Warning

      If the result is not as specified, replace the clock assembly.