FRONT DOOR COURTESY SWITCH INSPECTION

PROCEDURE

1. INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY LH

   
   
   1. 

      *a	Component without harness connected (Front Door Courtesy Light Switch Assembly LH)
      *b	Switch Body

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - Switch body Not pushed (ON) Below 1 Ω Pushed (OFF) 10 kΩ or higher

      If the result is not as specified, replace the front door courtesy light switch assembly LH.

2. INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY RH

   
   
   1. 

      *a	Component without harness connected (Front Door Courtesy Light Switch Assembly RH)
      *b	Switch Body

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - Switch body Not pushed (ON) Below 1 Ω Pushed (OFF) 10 kΩ or higher

      If the result is not as specified, replace the front door courtesy light switch assembly RH.