LUGGAGE COMPARTMENT ROOM LIGHT INSPECTION

PROCEDURE


  1. INSPECT NO. 1 ROOM LIGHT ASSEMBLY


    1. A018M3HC01
      *a

      Component without harness connected

      (No. 1 Room Light Assembly)

      Apply battery voltage to the connector and check that the No. 1 room light comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative (-) → 1 (L)

      		 Always No. 1 room light comes on

      If the result is not as specified, replace the bulb or No. 1 room light assembly.