ROOM LIGHT INSPECTION

PROCEDURE


  1. INSPECT SPOT LIGHT ASSEMBLY LH (for Front Side or Rear Side)


    1. A018HB1C03
      *a

      Component without harness connected

      (Spot Light Assembly LH (for Front Side or Rear Side))

      Apply battery voltage to the connector and check that the spot light comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative (-) → 4 (E)

      		 Spot light switch on Spot light comes on
      Spot light switch off Spot light does not come on

      Battery positive (+) → 2 (B)

      Battery negative (-) → 3 (CTY)

      		 Spot light switch on Spot light does not come on
      Spot light switch off Spot light comes on

      If the result is not as specified, replace the bulb or spot light assembly LH (for Front Side or Rear Side).

  2. INSPECT SPOT LIGHT ASSEMBLY RH (for Front Side or Rear Side)


    1. A018HB1C03
      *a

      Component without harness connected

      (Spot Light Assembly RH (for Front Side or Rear Side))

      Apply battery voltage to the connector and check that the spot light comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative (-) → 4 (E)

      		 Spot light switch on Spot light comes on
      Spot light switch off Spot light does not come on

      Battery positive (+) → 2 (B)

      Battery negative (-) → 3 (CTY)

      		 Spot light switch on Spot light does not come on
      Spot light switch off Spot light comes on

      If the result is not as specified, replace the bulb or spot light assembly RH (for Front Side or Rear Side).