SECURITY HORN ASSEMBLY REMOVAL

PROCEDURE

1. REMOVE RADIATOR SIDE DEFLECTOR SEAL LH

   Click here

2. REMOVE RADIATOR SIDE SEAL RH

   Click here

3. REMOVE COOL AIR INTAKE DUCT SEAL

   Click here

4. REMOVE INLET AIR CLEANER ASSEMBLY (for 1AR-FE)

   Click here

5. REMOVE INLET AIR CLEANER ASSEMBLY (for 2GR-FE)

   Click here

6. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE (for 1AR-FE)

   Click here

7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE (for 2GR-FE)

   Click here

8. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY (for 1AR-FE)

   Click here

9. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY (for 2GR-FE)

   Click here

10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 1AR-FE)

    Click here

11. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 2GR-FE)

    Click here

12. REMOVE SECURITY HORN ASSEMBLY

    
    

    1. 

       Remove the bolt.

    2. Disengage the guide.

    3. 

       Disconnect the connector to remove the security horn assembly.