ELECTRICAL KEY OSCILLATOR(for Center Floor) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. Install the No. 2 indoor electrical key antenna assembly with the nut.

      Note

      Be careful when installing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.

   2. Engage the clamp and connect the connector.

   3. Install the floor carpet.

2. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

   Click here

3. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

   Click here

4. INSTALL REAR NO. 2 SEAT ASSEMBLY

   Click here