VANITY LIGHT INSPECTION

PROCEDURE


  1. INSPECT VISOR ASSEMBLY LH


    1. A018GXEC01
      *a

      Component without harness connected

      (Visor Assembly LH)

      Apply battery voltage to the connector and check that the vanity light comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (+B)

      Battery negative (-) → 1 (E)

      		 Open the mirror cover Vanity light comes on

      If the result is not as specified, replace visor assembly LH.

  2. INSPECT VISOR ASSEMBLY RH


    1. A018GXEC01
      *a

      Component without harness connected

      (Visor Assembly RH)

      Apply battery voltage to the connector and check that the vanity light comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (+B)

      Battery negative (-) → 1 (E)

      		 Open the mirror cover Vanity light comes on

      If the result is not as specified, replace visor assembly RH.