THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Key Unlock Warning SW Unlock warning switch*1 ON or OFF

      ON: Key inserted into ignition key cylinder

      OFF: Key removed from ignition key cylinder

      		 -
      ACC SW Ignition switch ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch LOCK

      		 -
      IG SW Ignition switch ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch LOCK or ACC

      		 -
      RR Door Courtesy SW Rear door courtesy light switch assembly (for RH) ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch assembly (for LH) ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      Glass Hatch Courtesy Switch Glass hatch courtesy light switch*2 ON or OFF

      ON: Glass hatch open

      OFF: Glass hatch closed

      		 -
      FR Door Lock Pos Front door RH unlock detection switch LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch assembly (for RH) ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos Front door LH unlock detection switch LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch assembly (for LH) ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      Hood Courtesy SW Engine hood courtesy switch ON or OFF

      ON: Engine hood open

      OFF: Engine hood closed

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch ON or OFF

      ON: Rear door LH unlocked

      OFF: Rear door LH locked

      		 -
      Glass Break Sensor Detection Glass break sensor detection*3 ON or OFF

      ON: Glass break sensor detection

      OFF: Glass break sensor not detection

      		 Not applicable
      Panic Function Setting of the customized item "Panic Function"*4 ON or OFF Customized value displayed -
      Communication Theft Deterrent Connection status between theft deterrent ECU and main body ECU (multiplex network body ECU)*3 STOP or OK

      STOP: Communication stopped

      OK: Normal communication

      		 Not applicable

      • *1: w/o Smart Entry and Start System

      • *2: w/ Power Back Door System

      • *3: Although the item is displayed on the GTS, it is not applicable to this vehicle.

      • *4: w/ Panic Switch

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Security Indicator Security indicator* OFF/ON -
      Vehicle Horn Vehicle horns OFF/ON -
      Security Horn Security horn assembly OFF/ON -

      • *: w/o Smart Entry and Start System


      Body Electrical > Entry&Start > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Immobiliser Indicator Security indicator* OFF/ON -

      • *: w/ Smart Entry and Start System