REAR NO. 2 SEAT INNER BELT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY (for LH Side)


    1. A002A7PC02
      *a Rubber Band

      Pass the rear No. 2 seat inner belt sub-assembly through the rubber band of the rear seat cushion assembly as shown in the illustration.

    2. A0029RNC01
      B004057 Protruding Part

      Install the floor anchor of the rear No. 2 seat inner belt sub-assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear No. 2 seat inner belt sub-assembly to overlap the protruding parts of the floor panel.

  2. INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY (for RH Side)


    1. A0028DH

      Pass the rear No. 2 seat inner belt sub-assembly through the rear seat cushion assembly as shown in the illustration.

    2. A0028C8C01
      B004057 Protruding Part

      Install the floor anchor of the rear No. 2 seat inner belt sub-assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear No. 2 seat inner belt sub-assembly to overlap the protruding parts of the floor panel.

  3. INSTALL REAR DECK FLOOR BOX

    Click here

  4. INSTALL DECK SIDE TRIM BOX LH

    Click here

  5. INSTALL TONNEAU COVER ASSEMBLY

    Click here

  6. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  7. INSTALL DECK BOARD ASSEMBLY

    Click here