REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type RH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY RH


    1. A0027JQC02
      *a

      Component without harness connected

      (Rear Seat Inner Belt Assembly RH

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Rear seat belt RH unfastened Below 1 Ω
      Rear seat belt RH fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly RH.