REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type RH Side) REMOVAL

PROCEDURE


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY

    Click here

  2. REMOVE REAR SEAT REAR CUSHION MOULDING RH

    Click here

  3. REMOVE REAR SEAT INNER BELT ASSEMBLY

    Click here

  4. REMOVE REAR SEAT COVER CAP

    Click here

  5. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE

    Click here

  6. REMOVE REAR NO. 1 SEATBACK LOCK STRIKER COVER

    Click here

  7. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  8. DISCONNECT REAR SEAT CUSHION HEATER HARNESS (w/ Seat Heater System)

    Click here

  9. REMOVE REAR SEAT CUSHION COVER WITH PAD

    Click here

  10. REMOVE REAR SEAT HINGE COVER

    Click here

  11. REMOVE REAR SEAT INNER BELT ASSEMBLY RH


    1. w/ Seat Belt Warning System:


      1. Disengage each clamp.

      2. Remove the wire harness clamp.

    2. B00402K

      Loosen the bolt and remove the rear seat inner belt assembly RH.

      Tech Tips

      The bolt cannot be removed from the rear seat inner belt assembly RH.