REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type LH Side) INSTALLATION

PROCEDURE

1. INSTALL REAR SEAT INNER BELT ASSEMBLY LH

   
   
   1. 

      *a	Protruding Part

      Install the rear seat inner belt assembly LH with the bolt.

      Torque:

      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat inner belt assembly LH to overlap the protruding parts of the cushion frame.

   2. w/ Seat Belt Warning System:

      
      

      1. Engage each clamp.

      2. Install a new wire harness clamp.

      3. Connect the connector.

2. INSTALL REAR SEAT CUSHION HINGE COVER LH

   Click here

3. INSTALL REAR SEAT REAR CUSHION MOULDING

   Click here

4. INSTALL REAR SEATBACK COVER WITH PAD

   Click here

5. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

   Click here

6. INSTALL NO. 2 REAR SEAT COVER BEZEL

   Click here

7. INSTALL REAR SEATBACK LOCK STRIKER COVER

   Click here

8. INSTALL RECLINING REMOTE CONTROL LEVER KNOB

   Click here

9. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY

   Click here

10. INSTALL REAR SEATBACK COVER

    Click here

11. INSTALL REAR SEAT CUSHION COVER WITH PAD

    Click here

12. CONNECT REAR SEAT CUSHION HEATER HARNESS (w/ Seat Heater System)

    Click here

13. CONNECT REAR SEATBACK HEATER HARNESS (w/ Seat Heater System)

    Click here

14. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

15. INSTALL REAR NO. 1 SEATBACK LOCK STRIKER COVER

    Click here

16. INSTALL RECLINING ADJUSTER RELEASE HANDLE

    Click here

17. INSTALL REAR SEAT COVER CAP

    Click here

18. INSTALL REAR NO. 1 SEAT ASSEMBLY

    Click here