REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type LH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH


    1. A0027JQC03
      *a

      Component without harness connected

      (Rear Seat 3 Point Type Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Rear No. 1 LH seat belt unfastened Below 1 Ω
      Rear No. 1 LH seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat 3 point type belt assembly LH.