REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type LH Side) REMOVAL

PROCEDURE

1. REMOVE REAR NO. 1 SEAT ASSEMBLY

   Click here

2. REMOVE REAR SEAT COVER CAP

   Click here

3. REMOVE RECLINING ADJUSTER RELEASE HANDLE

   Click here

4. REMOVE REAR NO. 1 SEATBACK LOCK STRIKER COVER

   Click here

5. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

6. DISCONNECT REAR SEATBACK HEATER HARNESS (w/ Seat Heater System)

   Click here

7. DISCONNECT REAR SEAT CUSHION HEATER HARNESS (w/ Seat Heater System)

   Click here

8. REMOVE REAR SEAT CUSHION COVER WITH PAD

   Click here

9. REMOVE REAR SEATBACK COVER

   Click here

10. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY

    Click here

11. REMOVE RECLINING REMOTE CONTROL LEVER KNOB

    Click here

12. REMOVE REAR SEATBACK LOCK STRIKER COVER

    Click here

13. REMOVE NO. 2 REAR SEAT COVER BEZEL

    Click here

14. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    Click here

15. REMOVE REAR SEATBACK COVER WITH PAD

    Click here

16. REMOVE REAR SEAT REAR CUSHION MOULDING

    Click here

17. REMOVE REAR SEAT CUSHION HINGE COVER LH

    Click here

18. REMOVE REAR SEAT INNER BELT ASSEMBLY LH

    
    

    1. w/ Seat Belt Warning System:

       
       

       1. Disconnect the connector.

       2. Disengage each clamp.

       3. Remove the wire harness clamp.

    2. 

       Remove the bolt and rear seat inner belt assembly LH.