FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (FRONT PASSENGER SEAT)


    1. A018M8VC01
      *A for LHD
      *B for RHD
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (Front Passenger Seat))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LHD
      Tester Connection Condition Specified Condition
      L6-4 - B-1 Always Below 1 Ω
      L6-3 - B-3 Front passenger seat belt unfastened Below 1 Ω
      Front passenger seat belt fastened 10 kΩ or higher
      for RHD
      Tester Connection Condition Specified Condition
      M5-3 - B-1 Always Below 1 Ω
      M5-2 - B-3 Front passenger seat belt unfastened Below 1 Ω
      Front passenger seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (front passenger seat).