DIFFERENTIAL CASE REASSEMBLY

PROCEDURE


  1. INSTALL FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (INNER RACE)


    1. A0028I8N01

      Using SST and a press, install a new front differential case front tapered roller bearing (inner race) to the differential case assembly.

      SST
      09316-20011
      09387-00020

      Note


      • Do not damage the front differential case front tapered roller bearing (inner race) cage when installing the front differential case front tapered roller bearing (inner race).

      • Be sure to install the front differential case front tapered roller bearing (inner race) so that there is no clearance between the front differential case front tapered roller bearing (inner race) and the differential case assembly. If there is any clearance, the turning torque of the differential case assembly cannot be measured correctly.

  2. INSTALL FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (OUTER RACE)


    1. A00292WN01

      Using SST and a hammer, install the differential drive pinion shim and a new front differential case front tapered roller bearing (outer race) to the transaxle housing.

      SST
      09950-60020   ( 09951-00890 )
      09950-70010   ( 09951-07200 )

      Note

      Be sure to install the front differential case front tapered roller bearing (outer race) so that there is no clearance between the front differential case front tapered roller bearing (outer race), differential drive pinion shim and the transaxle housing. If there is any clearance, the turning torque of the differential case assembly cannot be measured correctly.

  3. INSTALL FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (INNER RACE)


    1. A002BQHN01

      Using SST and a press, install a new front differential case rear tapered roller bearing (inner race) to the differential case assembly.

      SST
      09316-20011
      09950-60020   ( 09951-00890 )
      09950-70010   ( 09951-07200 )

      Note


      • Do not damage the front differential case rear tapered roller bearing (inner race) cage when installing the front differential case rear tapered roller bearing (inner race).

      • Be sure to install the front differential case rear tapered roller bearing (inner race) so that there is no clearance between the front differential case rear tapered roller bearing (inner race) and the differential case assembly. If there is any clearance, the turning torque of the differential case assembly cannot be measured correctly.

  4. INSTALL FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (OUTER RACE)


    1. A00299XN01

      Using SST and a hammer, install a new front differential case rear tapered roller bearing (outer race) to the automatic transaxle case sub-assembly.

      SST
      09951-00850
      09950-70010   ( 09951-07200 )

      Note

      Be sure to install the front differential case rear tapered roller bearing (outer race) so that there is no clearance between the front differential case rear tapered roller bearing (outer race) and the automatic transaxle case sub-assembly. If there is any clearance, the turning torque of the differential case assembly cannot be measured correctly.

  5. INSTALL FRONT DRIVE SHAFT OIL SEAL RH


    1. Hold the differential case assembly in a vise between aluminum plates.

    2. A002AINN01

      Using SST and a hammer, install a new front drive shaft oil seal RH to the differential case assembly.

      SST
      09950-60010   ( 09951-00400, 09951-00330, 09952-06010 )
      09950-70010   ( 09951-07200 )
      Standard Depth
      21.5 to 22.5 mm (0.846 to 0.886 in.)

      Note

      Be careful not to damage the front drive shaft oil seal RH.

    3. Apply MP grease to the lip of the front drive shaft oil seal RH.