DIFFERENTIAL CASE DISASSEMBLY

PROCEDURE


  1. REMOVE FRONT DRIVE SHAFT OIL SEAL RH


    1. A002C1BN01

      Hold the differential case assembly in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

    2. Using SST, remove the front drive shaft oil seal RH from the differential case assembly.

      SST
      09308-00010

      Note

      Be careful not to damage the oil seal installation surface of the differential case assembly.

  2. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (OUTER RACE)


    1. A002BJXN01

      Using SST, remove the front differential case rear tapered roller bearing (outer race) from the automatic transaxle case sub-assembly.

      SST
      09308-36010

      Note

      Be careful not to damage the automatic transaxle case sub-assembly.

      Tech Tips

      Align the claw of the SST with the indentation of the automatic transaxle case sub-assembly when removing the parts.

      A002724

  3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (INNER RACE)


    1. A002CK5N01

      Using SST, remove the front differential case rear tapered roller bearing (inner race) from the differential case assembly.

      SST
      09950-40011   ( 09951-04010, 09952-04010, 09953-04030, 09954-04020, 09955-04011, 09957-04010, 09958-04011 )
      09950-60010   ( 09951-00340, 09951-00440, 09952-06010 )

      Note

      Because SST is attached to the roller portion, there is a possibility that the roller portion could break and SST could come off before the front differential case rear tapered roller bearing (inner race) comes off.

    2. A0027LIN01

      If the roller portion breaks and SST comes off, reattach SST to the inner race in the position shown in the illustration, and continue removing the parts.

      SST
      09950-40011   ( 09951-04010, 09952-04010, 09953-04030, 09954-04020, 09955-04011, 09957-04010, 09958-04011 )
      09950-60010   ( 09951-00340, 09951-00440, 09952-06010 )

  4. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (OUTER RACE)


    1. A0027W9N01

      Using SST, remove the front differential case front tapered roller bearing (outer race) and differential drive pinion shim from the transaxle housing.

      SST
      09308-36010

      Note

      Be careful not to damage the transaxle housing.

      Tech Tips

      Align the claw of the SST with the indentation of the transaxle housing when removing the parts.

      A0027E0

  5. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (INNER RACE)


    1. A0027VBN01

      Using SST, remove the front differential case front tapered roller bearing (inner race) from the differential case assembly.

      SST
      09950-00020
      09950-00030
      09950-60010   ( 09951-00440 )