DIFFERENTIAL OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE


  1. PRECAUTION

    Note

    If automatic transaxle assembly parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary.

    Click here

  2. REMOVE TRANSFER ASSEMBLY

    Click here

  3. REMOVE TRANSAXLE CASE OIL SEAL


    1. A002BSAC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, remove the transaxle case oil seal from the transaxle housing.

      Note

      Be careful not to damage the front differential case or transaxle housing.

  4. REMOVE FRONT DRIVE SHAFT OIL SEAL RH


    1. A0028S3N01

      Using SST, remove the front drive shaft oil seal RH from the front differential case.

      SST
      09308-00010

      Note

      Be careful not to damage the front differential case.

  5. INSTALL FRONT DRIVE SHAFT OIL SEAL RH


    1. Coat the lip of a new front drive shaft oil seal RH with MP grease.

    2. A0029AIC01
      *a Depth
      A00282JC01
      *a Depth

      Using SST and a hammer, install the front drive shaft oil seal RH to the front differential case.

      SST
      09950-60010   ( 09951-00410 )
      09950-70010   ( 09951-07200 )
      Standard Depth
      21.5 to 22.5 mm (0.846 to 0.886 in.)

      Note

      Do not damage the lip of the front drive shaft oil seal RH.

  6. INSTALL TRANSAXLE CASE OIL SEAL


    1. Coat the lip of a new front drive shaft oil seal RH with MP grease.

    2. A0029AIC01
      *a Depth
      A002C8GC01
      *a Depth

      Using SST and a hammer, install the transaxle case oil seal to the transaxle housing.

      SST
      09649-17010
      09950-70010   ( 09951-07200 )
      Standard Depth
      5.5 to 6.5 mm (0.217 to 0.256 in.)

      Note


      • Make sure that the transaxle case oil seal is installed in the correct direction.

      • Do not damage the lip of the transaxle case oil seal.

  7. INSTALL TRANSFER ASSEMBLY

    Click here