TRANSMISSION WIRE(When Not Using the Engine Support Bridge) REMOVAL

PROCEDURE


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE TORQUE CONVERTER ASSEMBLY

    Click here

  3. REMOVE OIL COOLER UNION SUB-ASSEMBLY


    1. B003ZHUC01
      *1 Oil Cooler Union Bolt

      Remove the bolt to separate the oil cooler union sub-assembly bracket portion from the automatic transaxle case sub-assembly.

    2. Remove the oil cooler union bolt, 2 gaskets and oil cooler union sub-assembly from the automatic transaxle case sub-assembly.

  4. REMOVE TRANSMISSION CASE SIDE COVER


    1. B003ZIN

      Remove the 10 bolts and transmission case side cover from the automatic transaxle case sub-assembly.

  5. REMOVE TRANSMISSION WIRE


    1. B003ZLNC01
      *a Connector A
      *b Connector B

      Disengage the clamp to disconnect the transmission wire from the solenoid lock plate.

    2. Disconnect the 9 solenoid valve connectors.

      Tech Tips


      • Using a screwdriver, disconnect the solenoid valve connector A using the procedure shown in the illustration.

      • Using a screwdriver, disconnect the solenoid valve connector B using the procedure shown in the illustration.

    3. B003ZEJ

      Remove the bolt and temperature sensor clamp and disconnect the temperature sensor from the transmission valve body assembly.

    4. B003ZO0

      Disconnect the transmission revolution sensor (NT) connector and transmission revolution sensor (NC) connector.

    5. B00404D

      Remove the bolt and transmission wire from the automatic transmission case sub-assembly.