VALVE BODY ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE TRANSMISSION WIRE (When Using the Engine Support Bridge)

    Click here

  2. REMOVE TRANSMISSION WIRE (When Not Using the Engine Support Bridge)

    Click here

  3. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    1. A002AF9

      Disengage the clamp to disconnect the transmission revolution sensor (NC) wire connector.

    2. A002AZR

      Remove the 9 bolts and transmission valve body assembly from the automatic transaxle case sub-assembly.

    3. B003ZTUC01
      *1 Transaxle Case Gasket
      *2 No. 1 Front Oil Pump Cover Gasket
      *3 No. 2 Front Oil Pump Cover Gasket

      Remove the 2 transaxle case gaskets from the automatic transaxle case sub-assembly.

    4. Remove the transaxle case gasket from the counter drive gear sub-assembly.

    5. Remove the No. 1 front oil pump cover gasket from the front oil pump assembly.

    6. Remove the No. 2 front oil pump cover gasket from the front oil pump assembly.