TRANSMISSION CONTROL CABLE REMOVAL

PROCEDURE


  1. REMOVE RADIATOR SIDE DEFLECTOR SEAL LH

    Click here

  2. REMOVE RADIATOR SIDE SEAL RH

    Click here

  3. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  4. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  6. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  8. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  9. DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)


    1. A0029OL

      Turn back the floor carpet.

    2. A0027QO

      Remove 3 nuts and disconnect the No. 1 parking brake cable assembly.

  10. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A002CNB

      Separate the end of the transmission control cable assembly from the transmission floor shift assembly.

    3. A0028R3C01
      *a Counterclockwise

      Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, separate the transmission control cable assembly from the transmission floor shift assembly.

    4. A0027LC

      Disengage the wire harness clamp.

    5. A002C44

      Remove the nut from the transmission control shaft lever.

    6. A0029GD

      Using a screwdriver, disengage the 4 claws and disconnect the transmission control cable assembly with the clip from the No. 1 transmission control cable bracket.

    7. B00404L

      Using a screwdriver, disengage the 2 claws and remove the clip from the transmission control cable assembly.

    8. A00276M

      Disconnect the transmission control cable assembly from the No. 3 transmission control cable bracket.

    9. A0028YM

      Turn back the dash panel insulator.

    10. Remove the 3 bolts and pull out the transmission control cable assembly from the cabin.