TRANSMISSION WIRE INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION WIRE

   
   
   1. 

      *1

      O-ring

      Coat the O-ring with ATF.

   2. Coat the bolt with ATF.

   3. Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

   4. Install the transmission wire clamp.

   5. Connect the shift solenoid valve SL connector.

   6. Connect the shift solenoid valve SLT connector.

   7. Connect the shift solenoid valve SLU connector.

   8. Connect the shift solenoid valve SL2 connector.

   9. Connect the shift solenoid valve SL1 connector.

   10. Connect the shift solenoid valve SL3 connector.

   11. Connect the shift solenoid valve SL4 connector.

   12. Connect the oil pressure switch assembly connector.

   13. Connect the revolution sensor connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   Click here