PROCEDURE
INSPECT SHIFT LEVER POSITION
When moving the shift lever from P to R with the ignition switch ON and the brake pedal depressed, check that the shift lever moves smoothly and correctly into position.
Start the engine and check that the vehicle moves forward when the shift lever is moved from N to D and moves rearward when the shift lever is moved to R.
If the operation is not as specified, inspect the park/neutral position switch assembly or adjust the transmission control cable assembly.
INSPECT SHIFT LOCK OPERATION
Move the shift lever to P.
Turn the ignition switch off.
Check that the shift lever cannot be moved from P to any other position.
Turn the ignition switch to ON, depress the brake pedal, and check that the shift lever can be moved from P to any other position.
If the operation is not as specified, inspect the transmission floor shift assembly.
INSPECT SHIFT LOCK RELEASE BUTTON OPERATION
Turn the ignition switch off.
Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the shift lever cap from the transmission floor shift assembly.
Note
Be careful not to damage the shift lever cap and transmission floor shift assembly.
When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved from P to any other position.
If the operation is not as specified, inspect the transmission floor shift assembly.
INSPECT KEY INTERLOCK OPERATION (w/o Smart Entry and Start System)
Turn the ignition switch to ON.
Depress the brake pedal and move the shift lever to any position other than P.
Check that the ignition key cannot be turned to LOCK.
Move the shift lever to P, turn the ignition key to LOCK and check that the ignition key can be removed.
If the operation is not as specified, inspect the transmission floor shift assembly.