TRANSFER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL TRANSFER ASSEMBLY


    1. Install the 4 new transfer and transaxle setting stud bolts to the automatic transaxle case positions shown in the illustration.

      A0027MPC01
      *a 69 mm (2.72 in.) *b 49 mm (1.93 in.)
      *c 22 mm (0.866 in.) - -
      Torque:
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Note

      Install the sealed side of the transfer and transaxle setting stud bolt to the automatic transaxle assembly.

    2. Install the transfer assembly to the automatic transaxle assembly with the 8 nuts.

      Torque:
      68.6 N*m  { 700 kgf*cm, 51 ft.*lbf }

      Note


      • Install the transfer assembly to the automatic transaxle assembly horizontally.

      • Do not touch the transfer assembly oil seals during installation.

  2. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (When Not Using the Engine Support Bridge)

    Click here

  3. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (When Using the Engine Support Bridge)

    Click here