TRANSFER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL TRANSFER ASSEMBLY


    1. Install the 4 new transfer and transaxle setting stud bolts to the automatic transaxle case positions shown in the illustration.

      A0027MPC01
      *a 69 mm (2.72 in.) *b 49 mm (1.93 in.)
      *c 22 mm (0.866 in.) - -
      Torque:
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Note

      Install the sealed side of the transfer and transaxle setting stud bolt to the automatic transaxle assembly.

    2. Install the transfer assembly to the automatic transaxle assembly with the 8 nuts.

      Torque:
      68.6 N*m  { 700 kgf*cm, 51 ft.*lbf }

      Note


      • Install the transfer assembly to the automatic transaxle assembly horizontally.

      • Do not touch the transfer assembly oil seals during installation.

  2. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

    Click here