TRANSFER ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (When Not Using the Engine Support Bridge)

    Click here

  2. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (When Using the Engine Support Bridge)

    Click here

  3. REMOVE TRANSFER ASSEMBLY


    1. A002AFK

      Remove the 8 nuts.

    2. Using a plastic hammer, remove the transfer assembly from the automatic transaxle assembly.

      Note


      • Remove the transfer assembly from the automatic transaxle assembly without tilting it.

      • During removal, do not hold the transfer assembly by the oil seals on either side of the transfer assembly.

    3. A00275J

      Remove the 4 transfer and transaxle setting stud bolts from the automatic transaxle assembly.