4WD CONTROL ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL 4WD ECU ASSEMBLY

   
   

   1. 

      Engage the 2 claws and install 4WD ECU assembly.

   2. Connect the 4WD ECU assembly connector.

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

3. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Click here

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

   Click here

5. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here