ATF TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY


    1. Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.

    2. Coat the 4 bolts with ATF.

    3. A0027SDC04
      *a Clamp

      Install the ATF temperature sensor assembly and clamp to the transmission valve body assembly with the 4 bolts.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }
      Bolt Length
      Bolt (A)
      25 mm (0.984 in.)
      Bolt (B)
      85 mm (3.35 in.)

    4. Connect the ATF temperature sensor assembly connector.

  2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

    Click here