DRIVING SUPPORT ECU(for LHD) INSTALLATION

PROCEDURE

1. INSTALL DRIVING SUPPORT ECU ASSEMBLY

   
   

   1. Engage the claw to install the driving support ECU assembly.

2. INSTALL ECU INTEGRATION BOX RH

   
   

   1. Install the ECU integration box RH with the bolt and 2 nuts.

   2. Engage the 2 clamps.

   3. Connect each connector.

3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

   Click here

7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

8. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here