MILLIMETER WAVE RADAR SENSOR REMOVAL

PROCEDURE

1. REMOVE RADIATOR SIDE DEFLECTOR SEAL LH

   Click here

2. REMOVE RADIATOR SIDE SEAL RH

   Click here

3. REMOVE COOL AIR INTAKE DUCT SEAL

   Click here

4. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY

   
   

   1. 

      Disconnect the connector.

   2. 

      	Bolt
      	Screw

      Remove the 2 bolts and 2 screws.

   3. Disengage the 2 guides and remove the millimeter wave radar sensor assembly.

      Note

      Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.