CAMERA HEATER INSTALLATION

PROCEDURE


  1. INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

    Note


    • Do not apply force to the heater area as the heater may become damaged.

    • Do not forcibly pull the wire harness as it may become damaged.


    1. A002987C01
      B004057 Heater Area

      Engage the 2 guides and 2 claws as shown in the illustration.

      Note

      Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.

    2. A0028VLN01

      Engage the 8 clamps to install the forward recognition with heater hood sub-assembly.

      Note

      As the No. 1 forward recognition cover cannot be installed correctly if the clamps are not engaged securely, make sure to engage each clamp securely.

      Tech Tips

      Engage the clamps in the order shown in the illustration.

  2. INSTALL FORWARD RECOGNITION CAMERA

    Click here