CRUISE CONTROL MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT CRUISE CONTROL MAIN SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      A002C96C01
      *a Component without harness connected (Cruise Control Switch) - -
      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (ECC) - 4 (CCS) Cruise control switch (ON-OFF button) released 1 MΩ or higher
      Cruise control switch (ON-OFF button) pushed Below 1.5 Ω
      +RES 235 to 245 Ω
      -SET 617 to 643 Ω
      CANCEL 1509 to 1571 Ω

    2. Apply battery voltage to the cruise control main switch connector and check that the cruise control main switch illuminates.

      A002831C01
      *a

      Component without harness connected

      (Cruise Control Main Switch)

      		 - -
      OK
      Connection Specified Condition

      Battery positive (+) → Terminal 3 (IL+2)

      Battery negative (-) → Terminal 1 (ILL-)

      		 Illuminates