DYNAMIC RADAR CRUISE CONTROL SYSTEM(for 2GR-FKS), Diagnostic DTC:P157800

DTC Code DTC Name
P157800 Brake System

DESCRIPTION

This DTC is stored when a malfunction is detected in the vehicle stability control system. Check the vehicle stability control system when DTC P157800 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
P157800 Brake System While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a malfunction in the vehicle stability control system is detected for 0.2 seconds or more.

  • Vehicle stability control system

  • Skid control ECU (brake actuator assembly)

  • ECM

CAUTION / NOTICE / HINT

Note

First check the CAN communication system by following How to Proceed with Troubleshooting. After checking that there are no malfunctions in the CAN communication system, proceed with troubleshooting

Click here

PROCEDURE


  1. CHECK FOR DTCs (VEHICLE STABILITY CONTROL SYSTEM)


    1. Check for DTCs.

      Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output A
      DTC is output B

    B

    GO TO VEHICLE STABILITY CONTROL SYSTEM Click here

    A

  2. CHECK FOR DTCs (RADAR CRUISE 1)


    1. Clear the DTCs.

      Click here


      Powertrain > Radar Cruise1 > Clear DTCs

    2. Perform the following to make sure that the DTC detection conditions are met.

      Tech Tips

      If the following conditions are not met, the malfunction cannot be detected.


      1. Drive the vehicle at a speed for which dynamic radar cruise control operation is possible.

      2. Turn the cruise control system on using the cruise control main switch (ON-OFF button).

      3. Drive the vehicle at 36 km/h (22 mph) or more for 0.2 seconds or more.

    3. Check for DTCs.

      Click here


      Powertrain > Radar Cruise1 > Trouble Codes
      Result
      Result Proceed to
      DTC P157800 is not output A
      DTC P157800 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

  3. REPLACE ECM


    1. Replace the ECM.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  4. CHECK FOR DTCs (RADAR CRUISE 1)


    1. Clear the DTCs.

      Click here


      Powertrain > Radar Cruise1 > Clear DTCs

    2. Perform the following to make sure that the DTC detection conditions are met.

      Tech Tips

      If the following conditions are not met, the malfunction cannot be detected.


      1. Drive the vehicle at a speed for which dynamic radar cruise control operation is possible.

      2. Turn the cruise control system on using the cruise control main switch (ON-OFF button).

      3. Drive the vehicle at 36 km/h (22 mph) or more for 0.2 seconds or more.

    3. Check for DTCs.

      Click here


      Powertrain > Radar Cruise1 > Trouble Codes
      Result
      Result Proceed to
      DTC P157800 is not output A
      DTC P157800 is output B

    A

    END

    B

    REPLACE BRAKE ACTUATOR ASSEMBLY Click here