ENGINE SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE COMBINATION METER ASSEMBLY (for LHD)

    Click here

  4. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

  5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)

    Click here

  6. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for LHD)

    Click here

  7. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (for LHD)

    Click here

  8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  9. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for LHD)

    Click here

  10. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for LHD)

    Click here

  11. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY (for LHD)

    Click here

  12. REMOVE CONSOLE BOX ASSEMBLY (for LHD)

    Click here

  13. REMOVE NO. 2 SWITCH HOLE BASE (for LHD)

    Click here

  14. REMOVE FRONT NO. 2 CONSOLE BOX INSERT (for LHD)

    Click here

  15. REMOVE CONSOLE BOX INSERT (for LHD)

    Click here

  16. REMOVE FRONT DOOR SCUFF PLATE RH (for LHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  17. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  18. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for LHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  19. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

    Click here

  20. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  21. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)

    Click here

  22. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

    Click here

  23. REMOVE INSTRUMENT CLUSTER FINISH PANEL END (for LHD)

    Click here

  24. REMOVE INSTRUMENT PANEL FINISH PLATE (for LHD)

    Click here

  25. REMOVE NO. 1 SWITCH HOLE BASE (for LHD)

    Click here

  26. REMOVE ENGINE SWITCH (for LHD)


    1. A00296I

      Disengage the 2 claws and remove the engine switch.

  27. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  28. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  29. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  30. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for RHD)

    Click here

  31. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  32. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for RHD)

    Click here

  33. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for RHD)

    Click here

  34. REMOVE ENGINE SWITCH (for RHD)


    1. A0026X8

      Disengage the 2 claws and remove the engine switch.