STARTER INSTALLATION

PROCEDURE

1. INSTALL STARTER ASSEMBLY

   
   

   1. Install the starter assembly with the 2 bolts.

      Torque:

      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

   2. Connect the starter assembly connector.

   3. Connect terminal 30 with the nut.

      Torque:

      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

   4. Close the terminal cap.

2. INSTALL BATTERY

   Click here

3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   Click here

5. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

   Click here

6. INSTALL INLET AIR CLEANER ASSEMBLY

   Click here

7. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here

8. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here