ENGINE OIL COOLER INSTALLATION

PROCEDURE

1. INSTALL OIL COOLER ASSEMBLY

   
   

   1. Install the No. 1 cylinder block insulator and 2 new O-rings to the No. 1 oil cooler bracket.

   2. Install the oil cooler assembly to the No. 1 oil cooler bracket with the 2 bolts and 2 nuts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

   3. Connect the No. 4 water by-pass hose and No. 5 water by-pass hose to the oil cooler assembly, and slide the 2 clips to secure them.

   4. Install the hose clamp with the nut to the cylinder block sub-assembly.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. INSTALL EXHAUST MANIFOLD ASSEMBLY LH

   Click here

3. ADD ENGINE OIL

   Click here

4. CHECK ENGINE OIL LEVEL

   Click here

5. INSPECT FOR OIL LEAK

   Click here

6. ADD ENGINE COOLANT

   Click here

7. INSPECT FOR COOLANT LEAK

   Click here