OIL PUMP REMOVAL

PROCEDURE


  1. REMOVE OIL PAN SUB-ASSEMBLY

    Click here

  2. REMOVE TIMING CHAIN CASE OIL SEAL

    Click here

  3. REMOVE TIMING CHAIN COVER ASSEMBLY


    1. A002AGXC01
      *a Nut

      Remove the 23 bolts and 2 nuts shown in the illustration.

    2. A002BEJC01
      *a Protective Tape

      Remove the timing chain cover assembly by prying between the timing chain cover assembly and cylinder head sub-assembly or cylinder block sub-assembly with a screwdriver with its tip wrapped with protective tape.

      Note

      Be careful not to damage the contact surfaces of the cylinder head sub-assembly, cylinder block sub-assembly and timing chain cover assembly.

    3. A0029Z3

      Remove the oil pump gasket from the cylinder block sub-assembly.