OIL PUMP REMOVAL

PROCEDURE


  1. REMOVE OIL PAN SUB-ASSEMBLY

    Click here

  2. REMOVE TIMING CHAIN COVER SUB-ASSEMBLY


    1. A0028KJC03
      *a Nut

      Remove the 23 bolts and 2 nuts shown in the illustration.

    2. A002B4VC06
      *a Protective Tape

      Remove the timing chain cover sub-assembly by prying between the timing chain cover sub-assembly and cylinder head sub-assembly or cylinder block sub-assembly with a screwdriver.

      Note

      Be careful not to damage the contact surfaces of the cylinder head sub-assembly, cylinder block sub-assembly and timing chain cover sub-assembly.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A002C36

      Remove the gasket.

  3. REMOVE TIMING CHAIN CASE OIL SEAL


    1. A00285YC03
      *a Protective Tape
      *b Wooden Block

      Using a screwdriver, pry out the timing chain case oil seal.

      Tech Tips

      Tape the screwdriver tip before use.