OIL PRESSURE SWITCH REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  3. SEPARATE FRONT FENDER LINER RH

    Click here

  4. REMOVE FRONT FENDER APRON SEAL RH

    Click here

  5. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A002C20C01
      *1 Wire Harness Protector

      Disconnect the wire harness protector. (w/ Oil Cooler)

    2. Disconnect the oil pressure switch assembly connector.

    3. A0027DM

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.