COOLING FAN MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT COOLING FAN MOTOR LH


    1. Disconnect the cooling fan motor LH connector.

    2. A0029SZC12
      *a

      Component without harness connected

      (Cooling Fan Motor LH)

      Check that the cooling fan motor LH operates smoothly when the battery is connected to the cooling fan motor LH connector.

    3. Measure the current while the cooling fan motor LH is operating.

      Standard Current
      Condition Specified Condition
      Battery voltage applied at 20°C (68°F) 11.5 to 17.5 A

      If the result is not as specified, replace the cooling fan motor LH.

    4. Connect the cooling fan motor LH connector.

  2. INSPECT COOLING FAN MOTOR RH


    1. Disconnect the cooling fan motor connector RH.

    2. A002CG3C16
      *a

      Component without harness connected

      (Cooling Fan Motor)

      Check that the cooling fan motor RH operates smoothly when the battery is connected to the cooling fan motor RH connector.

    3. Measure the current while the cooling fan motor RH is operating.

      Standard Current
      Condition Specified Condition
      Battery voltage applied at 20°C (68°F) 11.5 to 17.5 A

      If the result is not as specified, replace the cooling fan motor RH.

    4. Connect the cooling fan motor RH connector.