VALVE BODY ASSEMBLY(When Not Using the Engine Support Bridge) REMOVAL

PROCEDURE


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE TORQUE CONVERTER ASSEMBLY

    Click here

  3. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. B003ZZV

      Remove the 19 bolts and automatic transaxle oil pan sub-assembly from the automatic transaxle assembly.

      Note

      Some fluid will remain in the automatic transaxle oil pan sub-assembly. Remove all the bolts and carefully remove the automatic transaxle oil pan sub-assembly.

  4. REMOVE AUTOMATIC TRANSAXLE OIL PAN GASKET


    1. Remove the automatic transaxle oil pan gasket from the automatic transaxle oil pan sub-assembly.

  5. REMOVE TRANSMISSION OIL CLEANER MAGNET


    1. B003YWXC01
      *1 Transmission Oil Cleaner Magnet

      Remove the 4 transmission oil cleaner magnets from the automatic transaxle oil pan sub-assembly.

    2. A0027UP

      Examine the particles in the automatic transaxle oil pan sub-assembly.


      1. Collect any steel chips with the removed transmission oil cleaner magnets. Look carefully at the chips and particles in the automatic transaxle oil pan sub-assembly and on the transmission oil cleaner magnets to see the type of wear which might be found in the automatic transaxle assembly.

        Result
        Steel (magnetic)
        Bearing, gear and plate wear
        Brass (non-magnetic)
        Bushing wear

  6. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


    1. B003ZE1

      Remove the 2 bolts and valve body oil strainer assembly from the transmission valve body assembly.

    2. B003ZWPC02
      *1 O-ring

      Remove the O-ring from the valve body oil strainer assembly.

  7. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    1. B00407R

      Remove the 11 bolts and transmission valve body assembly from the automatic transaxle assembly.

      Note

      When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and automatic transaxle assembly to interfere with each other.

  8. REMOVE NO. 1 GOVERNOR APPLY GASKET


    1. B003ZKL

      Remove the 2 No. 1 governor apply gaskets from the automatic transaxle assembly.

  9. REMOVE MANUAL VALVE


    1. A002AVX

      Remove the manual valve from the transmission valve body assembly.