TRANSMISSION WIRE INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION WIRE

   
   

   1. Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

   2. Coat the temperature sensor with ATF.

   3. Install the temperature sensor and lock plate to the transmission valve body assembly with the bolt.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

   4. Engage the transmission wire clamp.

   5. Connect the 7 shift solenoid valve connectors.

   6. Connect the transmission revolution sensor connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   Click here