TRANSMISSION WIRE REMOVAL

PROCEDURE

1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY (When Not Using the Engine Support Bridge)

   Click here

2. REMOVE TRANSMISSION VALVE BODY ASSEMBLY (When Using the Engine Support Bridge)

   Click here

3. REMOVE TRANSMISSION WIRE

   
   

   1. 

      Disconnect the transmission revolution sensor connector.

   2. Disconnect the 7 shift solenoid valve connectors.

   3. Disengage the transmission wire clamp.

   4. Remove the bolt and lock plate and separate the temperature sensor from the transmission valve body assembly.

   5. 

      Remove the bolt, lock plate and transmission wire from the transmission valve body assembly.