SPEED SENSOR INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION REVOLUTION SENSOR


    1. A0029A0C01

      Temporarily install the transmission revolution sensor to the transmission valve body assembly with the 2 bolts.

      Note

      Do not use a transmission revolution sensor that has been dropped.

    2. Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

    3. Connect the transmission revolution sensor connector.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY (When Not Using the Engine Support Bridge)

    Click here

  3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY (When Using the Engine Support Bridge)

    Click here