TRANSFER CASE FRONT OIL SEAL(for LH Side) REPLACEMENT

PROCEDURE


  1. REMOVE TRANSFER ASSEMBLY

    Click here

  2. REMOVE TRANSFER CASE OIL SEAL


    1. A0028ZPN05

      Using SST, remove the transfer case oil seal from the transfer assembly.

      SST
      09308-00010

      Note

      Do not damage the transfer case oil seal contact surface to the transfer assembly.

  3. INSTALL TRANSFER CASE OIL SEAL


    1. A002AO2N02

      Using SST and a hammer, install a new transfer case oil seal as shown in the illustration.

      SST
      09608-10010
      09950-70010   ( 09951-07150 )
      Standard Depth
      9.5 to 10.5 mm (0.375 to 0.413 in.)

      Note


      • Tap in the transfer case oil seal uniformly so that the transfer case oil seal is straight.

      • Do not tap in the transfer case oil seal in too far.

    2. Apply a small amount of MP grease to the lip of the transfer case oil seal.

  4. INSTALL TRANSFER ASSEMBLY

    Click here